Simple Guide to Installing a New Shower Unit

Simple Guide to Installing a New Shower Unit

Blog Article

Request Free Estimate

We've stumbled upon this great article on How to Build a Shower Enclosure for Your DIY Bathroom below on the internet and decided it made good sense to write about it with you on my blog.

A successful shower installation needs careful preparation as well as a great deal of job. Most of the times, you will certainly require to do 3 kinds of jobs: mounting wall surfaces, setting up the plumbing, as well as finishing wall surfaces.

Preparation

First of all, you need to pick the type of shower that you want to set up. It is important to establish whether the picked shower is capable of managing specific systems and can regulate a safe level of water with the boiler. A lot of shower devices nowadays are designed to be versatile to different water pressures (such as kept hot water as well as cold mains).
It is also crucial to take into account the water pressure and also the planning of the piping and also drain for the shower

Different Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower system can be connected to the bathroom faucet based on your need, and the water temperature can be changed through the faucets. Push-on mixers are cheap and also exceptionally straightforward to set up. However, although the pipe connection is easy, it is quickly dislodged. Furthermore, it is inconvenient to readjust the temperature.

Bath/Shower Mixer: The hose and also spray of this sort of shower are integrated with a bath mixer faucet, and the temperature can be changed through the bath taps. It is a very affordable alternative as well as no added plumbing is included. However, the bath/shower mixers likewise experience inconvenient temperature control options.

Manual Mixer: The hose pipe and also spray of a hands-on mixer shower system are a part of the wall unit and also the cold and hot water products are linked to a solitary valve The temperature and pressure of the water are managed via either one or a range of handles (in extra costly showers). Although temperature level control is much easier in hand-operated mixer types, they are much more costly than the previously stated mixers. They additionally need extra plumbing of hot and cold water supply pipes.

Thermostatic Mixer: The pipe as well as spray of this shower kind belong of the wall surface unit and also the cold and hot water materials are linked to a solitary shutoff here also. It is total with an integrated stabiliser to self-adjust the water temperature and also to avoid it from becoming as well warm. Among the most significant benefits of a thermostatic mixer shower type includes convenient temperature level control. Nevertheless, it is the most costly of the different mixer alternatives.

Power Shower: A power shower is a single device containing a powerful electrical pump that can modifying both the water pressure as well as temperature level. This sort of shower can be fitted if there is supply of water from a cold water tank and a warm water cyndrical tube. A power shower makes the adjustment of both pressure and temperature very easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is supplied by a mix boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and it warms the water electrically. It is important to note that for this shower type to be installed, the mains pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The system permits the temperature level and also stress to be changed through a knob. Designs with temperature stabilisers are much better as they remain unaffected by other faucets somewhere else in use within the family. A significant downside of electric showers is that the control knob only permits the option of high temperatures at less pressure, or lower temperature levels at a better stress. This is bothersome in the winter when the spray is typically weak and also the keys water is cooler. However, this problem is dealt with in some designs which are readily available with a winter/summer setup.

Approach

Relying on the kind of shower you want to set up, the shower head need to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check shutoff.
Before beginning, it is advisable to mark the positions of the shower head and control, as well as to plan the pipe-work entailed. Furthermore, the drainage system to get rid of the waste water will certainly need to be prepared. Both placements of the cable television path and the shower switch will certainly additionally require to be thought about if an immediate or electrical shower device is being set up.
Utilize the guideline guide offered with the shower device to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is very important to remove the water system. In order to shield the pipelines, they must be provided a waterproof covering as well as also fitted with separating shutoffs. The pipes can then be hidden right into the wall surface as well as plastered over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Attach the main shower control to the pipes that will be supplying the water (This may require a female screw thread adapter).
Reconnect the water system as well as test the pipes for any type of leakages, as some might require firm.
If you are installing an electrical shower, remember to turn off the electrical power supply before making any kind of electrical links. As soon as these links have actually been made (there must be advice within the instruction manual), the power supply can be changed back on.

Readjusting Water Pressure to Match Your Shower

The cold water storage tank can be raised to a higher height (sometimes as low as 150mm (6inches)) by installation a solid wooden assistance under it - possibly made up of struts and also blockboards. If you pick this choice, the primary and circulation pipes will certainly also need to be elevated to satisfy the brand-new height of the storage tank.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it should be connected into the power supply in order to operate.

Piping and Drainage

It is best to utilize 15mm size supply pipes, as well as make the go to the shower as short and also straight as feasible so as to preserve maximum stress as well as minimise warm loss. In addition, by minimising the use of elbows for pipe corners, you can lower the resistance in the circulation of the water system. You can attain this by bending the pipes rather.

Most Common Errors

Going against or disregarding neighborhood code restrictions.

Using pipelines that are also little.

Connecting copper to galvanized without utilizing a brass or dielectric fitting between both.

Not making use of tape or pipeline compound at threaded joints.

Uneven your fixtures when mounting them.

Not installing an air space filling up for components.

Reducing supply stub outs too short to set up the shutoff valves onto after the finished wall is in location.

Not correctly aligning tubing into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will trigger a leakage.).

When turning the water back on in your house, constantly run the outdoors tube shutoff or purge your bathrooms to hemorrhage dirt as well as air from the lines. This particles can create problems in your sink taps and also various other plumbing trim.

How Do You Install a Shower? Follow This Guide

Installing a Shower at a Glance

Tools & Materials: Level, electric drill, caulk, hole saw, cedar shims, shower unit

Step 1: Drill pilot holes

Step 2: Prep fixture holes

Step 3: Move unit into place

Step 4: Caulk corners and base

Step 5: Attach door

Step 6: Install shower pan

Whenever plumbing is involved in a DIY project, people worry about what might go wrong. The truth is that installing a shower isn’t that complicated, and you can save a lot of money by doing it yourself. You shouldn’t need to make any alterations to your plumbing to complete the job, and most of the tools you need will be provided in your new shower kit.

Can I Install a Shower Myself?

Even if you’ve never installed a shower before, you’ll find this to be a project that is perfectly suited for DIYers with a moderate level of experience. Whether you're doing a bathtub conversion or installing a new stall, most of what you need comes in shower kits that you can purchase from a hardware store. The first thing you need to do is determine what type of shower stall you want.

Single-panel stalls are the easiest to install because they come preassembled. All you need to do is put them in place. Multi-panel showers require a few additional steps, but you’ve got more control over the appearance of your unit. Multi-panel units are also much easier to handle if you’re going to do the installation without any help.

Be sure to take all appropriate safety precautions, such as wearing eye protection and gloves. When you’re removing or installing a shower unit, you might kick up debris that could hurt your eyes. You’ll also need to work with equipment that will get extremely hot, so be sure to have safety gloves handy.

Tools and Materials

2- to 4-foot level

Electric drill with a 1/8-inch drill bit

Caulk

2-inch hole saw

Cedar shims

The unit itself

Before You Begin: Prep the Space

It’s highly important to measure your space accurately before putting the stall in. Measuring from the floor upward and from each corner outward will ensure you’ve got the right measurements. What you’re looking for is where the plumbing apparatuses are going to come through the stall. Transfer these measurements over to the back of your unit by drawing the locations of these holes using a pencil or marker.

Pull out your old shower and make sure to scrape off all the old caulking. Be thorough because you want to work with smooth surfaces for the best installation. Once you’ve pulled out your existing shower, you need to make sure that the floor is clean and dry. The best way to clean debris is with a shop vacuum, as it’ll soak up water and dirt together.

If you’re experiencing any plumbing issues, such as low water pressure, this is a perfect opportunity to solve them. Make sure that the pipes themselves are not in need of patching and clean your showerhead. When you turn the water back on after your project, check the pipes for signs of wear or disrepair. Anything beyond minor repairs should be handled by a plumber, and this is the best time to bring in a professional.

If the floor has any moisture at all, don’t proceed until it’s completely dry. The last thing you need is for the floor to rot or invite mold and mildew into your base. Once everything is dry, apply waterproof wallboard to the walls. This can be attached with screws or nails, then sealed with caulk so that water doesn’t seep into any crevices.

https://www.homeserve.com/en-us/blog/how-to/install-shower/

Do you like reading up on How to Install a Freestand? Post feedback down the page. We will be delighted to see your responses about this review. In hopes that you visit us again in the future. You should take the opportunity to distribute this blog if you enjoyed reading it. I enjoy reading our article about How to Install a Direct-to-Stud Shower Enclosure.

Call Today

Report this page